Water:
Thanks to our partners, Boontec has all the services and measuring systems required to deal with the water cycle.
Flowmeters
Electromagnetic insertion flowmeters
Can be used as a temporary or permanent flow measurement, installation without flow disruption
Can be used on unpowered sites and locations
Real time data through GSM and SMS data loggers or SCADA system
Water Loss Management Program, leak detection, hydraulic studies and models, DMAs and bulk metering
Battery operated FLT40
This flowmeter is use with FLT02M and FLT01 sensors range.
Bi-directional measurement of flow velocity.
Flowmeter provided with pulse outputs and with a 4-20 mA output
Internal data logger
Insertion electromagnetic sensor FLT01
Very simple to implement FLT01 electromagnetic insertion sensor is assembled on pipe though a pricking 1"
This assembly can be carried out in load.
FLT01 probe function with converters FLT20 and FLT40.
This sensor is provided with an agreement on food contact ACS.
HydrINS2
The HydrINS 2 Mini flow meter can be used either occasionally,when required, or for a permanent flow-metering function. Its electromagnetic sensor is of the latest generation and ensures two-way flow measurement down to a minimum velocity of 2 cm/s.
HydrINS 2 offers
- velocity measured up to 2cm/s.
- precision of measured value: 2% or 2 mm/s.
- Ultra high precision on low flow rate values
- IP 68.
- Winfluid software interface
4 different models allow flow rates to be measured on diameters between around 100 and 2500 mm.
Electromagnetic full bore flowmeters
Can be used as permanent flow measurement installation requesting flow disruption
Can be used on unpowered sites and locations
Real time data through GSM and SMS data loggers or SCADA system
Water Loss Management Program, leak detection, hydraulic studies and models, DMAs and bulk metering
Electromagnetic flowmeter FLT02M
Function with converter FLT20 and FLT40.
FLT02M flow meter offers a great measuring accuracy
Electromagnetic flowmeter for Fire hydrant FLT40FH
Equipped with Logger 100.000 events and a numerical measurement of pressure
The FLT40FH allows the measurement of the flow and of the pressure in the fire hydrants without causing pressure losses and thus without causing errors.
Measurements are recorded with the date and the hour in the built-in memory.
The autonomy of its battery allows a use of approximately 20 hours.
Ultrasonic transit time flowmeters
Fixed ultrasonic flowmeter FLT10
Ultrasonic flow meter FLT10 was worked out to carry out measurements.
On pressure pipes with intrusive or clamp-on probes.
It functions with one or several pairs of sensors.
Wetted ultrasonics sensors FLT25
Very simple to implement, suitable for almost all applications Insertion probe FLT025 are manufactured out of stainless steel.
Wetted FLT25 sensors are provide with an agreement on food contact ACS.
Open Chanel
FLT10OC
Ultrasonic flow meter FLT10 OC integrates information level measurement.
The velocity measurement of the fluid is carried out for one or more chords.
The precision and the reliability of this measurement are exelentes.
Portable Ultrasonic flowmeters
FLT10PN
Its range of external probes enables him to carry out measurements on charged mains.
Diameters ranging between 20 and 5000 mm.
Its data logger allows a recording of the flows and volumes.
ChronoFlo
The ChronoFlo flow meter is housed in a waterproof case, with military-type connectors. As standard, it has on/off inputs and outputs, 4-20 mA outputs, uses an external power supply and has an RS232 connection.
The flow meter is equipped with a data recorder that can record up to 128,000 values, which can be processed with Winfluid, and can operate in full standalone mode for up to 1 month.
It is compatible with all our sampler range
Mainstream IV
The Mainstream Doppler flowmeter measures and records flows for open channels and part-filled pipes.
The Mainstream is used:
- either in portable configuration, for survey and diagnostic work, for precise flow data in sewer networks
- or in fixed configuration, for regulatory works and overflow surbey
Data loggers:
A complete range of data loggers from one to four channels IP68, communication: RTC, radio, GSM, GPRS
- Drinking water and wastewater survey
- Permanent or temporary monitoring (pressure, flow, water level)
- Programmable alarm (low or high pressure)
- Wired and wireless communication
- Ground Water monitoring
- Rainfall, sewer overflow and pump running time survey
- Pressure transients monitoring
Software
Software - for Microsoft Windows - WinFluid
WinFluid software for Microsoft® Windows® (95/98/NT/2000/XP/Vista/7/8) is the crux of our measuring systems.
It enables the programming and activation of measuring equipment as well as the downloading of data. It also deals with all level to flow conversions.
The "report" feature offers better data analysis tools such as linear interpolation, level to velocity correlation, file comparison.
Last but not least, WinFluid automatically controls data retrieval and storage (GSM data loggers)
WinFuild mobile and it's PDA
Thanks to its handlheld PDA, WinFluid Mobile Software can be programmed and can read and interpret the data of the Hydreka data logger and sensor range.
This PDA is suited to fieldwork and protected by a specially adapted hardwearing shell
Level / Pressure / Rain gauge
Ultrasonic sensor
Ultrasonic sensor
Ideal for remote waterlevel monitoring applications
No contact with effluent
Display flow by measuring water height in your open channel
Logging interval pace triggered by overflow
SonicSens
The Sonicsens comprises a standalone recorder, such as Multilog Lite or Octopus LX, and an independent ultrasonic probe. It thus measures level and flow rate for water treatment installations, surface water or drinking water.
The unit is rated IP68 and operates for 5 years on its lithium batteries, which means that it can be used on sites with no electricity supply.
Piezo metric sensor
Pressure and level monitoring
Height to flow conversion
PTX PDCR 1730
The PTX/PDCR 1730 piezo metric probe provides direct pressure measurement and derives water level within ± 0.25% of the full scale value. Several measurement scales are available, from 75 mbar to 60 bar.
Temperature compensation is operational and an atmospheric pressure unit is available. The output signal may be a voltage (serial PDCR) or current 4-20 mA (PTX).
The piezo metric probe can be used with a standalone data recorder (Lolog, Vista +, Octopus 4), or one with a communication capability (Octopus LX, Octopus LX-P).
The Winfluid interface allows the sensor to be programmed for alarm management based on min/max values or on acceptable flow rate range, to correct the measured value, to define level/flow rate conversions (free surface values) and to create measured data reports.
The sensors are calibrated on a certified calibration bench, before delivery and in the event of contractual calibration.
PTX PDCR 1830
The PTX/PDCR 1830 piezo metric probe provides direct pressure measurement and derives water level within ± 0.08% of the full scale value. Several measurement scales are available, from 75 mbar to 60 bar.
Temperature compensation is operational and an atmospheric pressure unit is available.
The output signal may be a voltage (serial PDCR) or current 4-20 mA (PTX).
The piezo metric probe can be used with our data recorder (Lolog, Vista +, Octopus 4), or one with a communication capability (Octopus LX, Octopus LX-P).
The Win fluid interface allows the sensor to be programmed for alarm management based on min/max values or on acceptable flow rate range, to correct the measured value, to define level/flow rate conversions (free surface values) and to create measured data reports.
The sensors are calibrated on a certified calibration bench, before delivery and in the event of contractual calibration.
Rain Gauge
The rain gauge is a reliable and robust sensor that provides precision rainfall measurement on a given site.
A heated version is available to record winter precipitation (hail or snow).
Based on small buckets that tip at 0.2 mm, its dry contact signal (Reed bulb type sensor) can be connected to one of the standalone data recorders (Lolog, Vista +, Octopus 4, Octopus LX).
Lolog and Vista + allow local reading of rainfall data recorded on a site. The Octopus LX data recorder has a communication function that allows readings by SMS/GPRS. Octopus 4 allows a sampler to be activated from a specified rainfall value.
The Winfluid interface also provides cumulative rainfall through a metrology report created in Winfluid.
Water Quality Probe
Wastewater
Boontec provides you with a range of solutions to monitor sewage and wastewater. These measuring systems can be used to:
- Measure depth
- Flow in open channels and pressurized pipes
- Sampling, physico-chemical quality assessments
- Rainfall
Majority of our measuring system is available in portable version or as a fixed installation.
Flowmeters
Electromagnetic insertion flowmeters
Full bore ...
Externally powered FLT20
This flowmeter is use with FLT02M and FLT01 sensors range.
Bi-directional measurement of flow velocity.
Flowmeter provided with pulse outputs and with a 4-20 mA output
Battery operated FLT40
This flowmeter is use with FLT02M and FLT01 sensors range.
Bi-directional measurement of flow velocity.
Flowmeter provided with pulse outputs and with a 4-20 mA output
Internal data logger
Insertion electromagnetic sensor FLT01
Very simple to implement FLT01 electromagnetic insertion sensor is assembled on pipe though a pricking 1"
This assembly can be carried out in load.
FLT01 probe function with converters FLT20 and FLT40.
This sensor is provided with an agreement on food contact ACS.
HydrINS2
The HydrINS 2 Mini flow meter can be used either occasionally,when required, or for a permanent flow-metering function. Its electromagnetic sensor is of the latest generation and ensures two-way flow measurement down to a minimum velocity of 2 cm/s.
HydrINS 2 offers
- velocity measured up to 2cm/s.
- precision of measured value: 2% or 2 mm/s.
- Ultra high precision on low flow rate values
- IP 68.
- Winfluid software interface
4 different models allow flow rates to be measured on diameters between around 100 and 2500 mm.
Electromagnetic full bore flowmeters
Can be used as permanent flow measurement installation requesting flow disruption
Can be used on unpowered sites and locations
Real time data through GSM and SMS data loggers or SCADA system
Water Loss Management Program, leak detection, hydraulic studies and models, DMAs and bulk metering
Electromagnetic flowmeter FLT02M
Function with converter FLT20 and FLT40.
FLT02M flow meter offers a great measuring accuracy
Doppler flowmeter
Mainstream IV
The Mainstream Doppler flowmeter measures and records flows for open channels and part-filled pipes.
The Mainstream is used:
- either in portable configuration, for survey and diagnostic work, for precise flow data in sewer networks
- or in fixed configuration, for regulatory works and overflow surbey
Bubbler flowmeter
Flowmeter 950
The SIGMA 950 range of flow meters comprises 8 different versions, with physical-chemical and rainfall measurement options.
They are compact and light (H34*W25*D24 and 5 kg) and are equipped with a large LCD screen.
The flow meters can be programmed, and the data processed, either using Winfluid software or directly through the keyboard.
They may be portable or installed as a fixed station, and are particularly useful for the checking and regulatory monitoring of urban or industrial waste water effluent.
Flow metering insert
Overflow Spouts
The overflow spouts are used with the SIGMA 950 bubble-to-bubble flow meter, to measure the free surface flow, in pipes of diameter 150, 200, 250 and 300 mm.
The spouts are inserted in the pipe and are held in place by an inflatable tube, which also provides the seal.
The effluent then overflows, either on a triangular type threshold, or on a round section channel.
The related hydraulic laws are provided by the Winfluid package.
Venturi channel
Venturi channels are rated channels, the specific shape of which means that the level of water flowing freely through the channel is directly proportional to its flow rate.
Nine models of venturi channel are available with or without a header channel, as a function of the flow rate values to be measured.
These channels are made of resin and can thus be used in severe or corrosive environments. The Winfluid software package provides all the level-flow rate conversions, for each venturi channel model.
When the channels have been installed, utilisation becomes very simple, for monitoring flow rates of rivers, sewage station inlets and outlets, or of any other free surface flow.
Data loggers
A complete range of data loggers from one to four channels IP68, communication: RTC, radio, GSM, GPRS
- Drinking water and wastewater survey
- Permanent or temporary monitoring (pressure, flow, water level)
- Programmable alarm (low or high pressure)
- Wired and wireless communication
- Ground Water monitoring
- Rainfall, sewer overflow and pump running time survey
- Pressure transients monitoring
Software
Software - for Microsoft Windows - WinFluid
WinFluid software for Microsoft® Windows® (95/98/NT/2000/XP/Vista/7/8) is the crux of our measuring systems.
It enables the programming and activation of measuring equipment as well as the downloading of data. It also deals with all level to flow conversions.
The "report" feature offers better data analysis tools such as linear interpolation, level to velocity correlation, file comparison.
Last but not least, WinFluid automatically controls data retrieval and storage (GSM data loggers)
WinFuild mobile and it's PDA
Thanks to its handlheld PDA, WinFluid Mobile Software can be programmed and can read and interpret the data of the Hydreka data logger and sensor range.
This PDA is suited to fieldwork and protected by a specially adapted hardwearing shell
Level / Pressure / Rain gauge
Ultrasonic sensor
Ultrasonic sensor
Ideal for remote waterlevel monitoring applications
No contact with effluent
Display flow by measuring water height in your open channel
Logging interval pace triggered by overflow
SonicSens
The Sonicsens comprises a standalone recorder, such as Multilog Lite or Octopus LX, and an independent ultrasonic probe. It thus measures level and flow rate for water treatment installations, surface water or drinking water.
The unit is rated IP68 and operates for 5 years on its lithium batteries, which means that it can be used on sites with no electricity supply.
Piezo metric sensor
Pressure and level monitoring
Height to flow conversion
PTX PDCR 1730
The PTX/PDCR 1730 piezo metric probe provides direct pressure measurement and derives water level within ± 0.25% of the full scale value. Several measurement scales are available, from 75 mbar to 60 bar.
Temperature compensation is operational and an atmospheric pressure unit is available. The output signal may be a voltage (serial PDCR) or current 4-20 mA (PTX).
The piezo metric probe can be used with a standalone data recorder (Lolog, Vista +, Octopus 4), or one with a communication capability (Octopus LX, Octopus LX-P).
The Winfluid interface allows the sensor to be programmed for alarm management based on min/max values or on acceptable flow rate range, to correct the measured value, to define level/flow rate conversions (free surface values) and to create measured data reports.
The sensors are calibrated on a certified calibration bench, before delivery and in the event of contractual calibration.
PTX PDCR 1830
The PTX/PDCR 1830 piezo metric probe provides direct pressure measurement and derives water level within ± 0.08% of the full scale value. Several measurement scales are available, from 75 mbar to 60 bar.
Temperature compensation is operational and an atmospheric pressure unit is available.
The output signal may be a voltage (serial PDCR) or current 4-20 mA (PTX).
The piezo metric probe can be used with our data recorder (Lolog, Vista +, Octopus 4), or one with a communication capability (Octopus LX, Octopus LX-P).
The Win fluid interface allows the sensor to be programmed for alarm management based on min/max values or on acceptable flow rate range, to correct the measured value, to define level/flow rate conversions (free surface values) and to create measured data reports.
The sensors are calibrated on a certified calibration bench, before delivery and in the event of contractual calibration.
Rain Gauge
The rain gauge is a reliable and robust sensor that provides precision rainfall measurement on a given site.
A heated version is available to record winter precipitation (hail or snow).
Based on small buckets that tip at 0.2 mm, its dry contact signal (Reed bulb type sensor) can be connected to one of the standalone data recorders (Lolog, Vista +, Octopus 4, Octopus LX).
Lolog and Vista + allow local reading of rainfall data recorded on a site. The Octopus LX data recorder has a communication function that allows readings by SMS/GPRS. Octopus 4 allows a sampler to be activated from a specified rainfall value.
The Winfluid interface also provides cumulative rainfall through a metrology report created in Winfluid.
Water Quality Probe
Portable samplers
Single bottle sampler
Our sampler comprises a refrigerated chamber, with a polythene or glass bottle, equipped with a HACH SIGMA 900 SD sampling unit. A folding transport trolley, with inflatable wheels, is also available.
The 12 V power supplies for the cold unit and the sampler head are separate, in order to allow all possible power supply combinations (mains power and/or battery).
The chamber temperature is fully adjustable, by the user, down to -18°C (which enables the chamber to be cooled before starting the analysis, and also the cooling of the samples, for transfer to the laboratory).
This instrument can be used in fixed station or portable mode, and is particularly useful for conducting regulatory inspections (effluent release or similar regulations) on urban and industrial waste water release, and for monitoring pollution in storm overflow systems, etc.
It will also facilitate your quality actions by ensuring that the cold chain is maintained, in compliance with ISO standard 5667-10 and the French effluent release regulations (RSDE).
Isothermal sampler
The 900 SD sampler is the latest of the HACH SIGMA range.
This instrument exists in single- or multi-bottle version (glass or polythene), and can be converted into a refrigerated version, by adapting the bases.
The sampler has a high-speed peristaltic pump (0.9 m/s at 4.6 m) with spring-mounted rollers, and meets the requirements of ISO standard 5667-10.
This instrument is particularly useful for sampling urban or industrial waste water (diagnostics, analyses, etc.), monitoring surface water (analyses, route plotting, etc.), and may be installed as a fixed station or mobile device.
This sampler is compatible with our entire product range. Thus, any type of programme can be activated as a function of parameters such as flow rate, rainfall, physical-chemical characteristics, level, etc.
Environmental monitoring:
Our expertise:
We are using the Carbon as a key variable input to structure upstream, the development of sustainable cities or sustainable projects and infrastructures.
With our partner, we provide integrated engineering solutions dedicated to eco districts, rural communities and remote sites:
- Identification of innovative and low carbon technologies solutions
- Proposal of solutions adapted to the local context
- Feasibility studies, dedicated carbon counting tool, impact on air quality
- Engineering, Civil Works supervision and onsite installation
- Maintenance, project monitoring indicators
Our services:
Low carbon and innovative technologies
- Treatment of wastewater by Bamboo “+icone pdf dl”
- On-grid or off grid dedicated renewable energy solutions
- Solar street lighting
- Solar powered intelligent waste Collectors, compact underground collectors
- Recycling composting unit from small to large scale